2 votes

Monter un disque dur avec plusieurs partitions

J'ai un disque dur externe avec deux partitions. Les deux sont ext3 partitions et fonctionne bien avec Linux. Lorsque je branche le disque dur USB sur mon appareil Android, cela ne fonctionne pas. Je vois des erreurs dans dmesg :

[ 3132.712025] sd 206:0:0:0: [sda] Unhandled error code

Voici le journal complet (également disponible à l'adresse suivante Pastebin ):

\[ 3129.797281\] usb 1-1: new high-speed USB device number 84 using ehci-platform
\[ 3129.948997\] usb 1-1: New USB device found, idVendor=04fc, idProduct=0c25
\[ 3129.949076\] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
\[ 3129.949118\] usb 1-1: Product: USB to Serial-ATA bridge
\[ 3129.949159\] usb 1-1: Manufacturer: Sunplus Technology Inc.
\[ 3129.949195\] usb 1-1: SerialNumber: ST3500820A            9QMB89AR
\[ 3129.956216\] usb-storage 1-1:1.0: USB Mass Storage device detected
\[ 3129.956759\] scsi206 : usb-storage 1-1:1.0
\[ 3130.943497\] scsi 206:0:0:0: Direct-Access     ST350082 0AS                   PQ: 0 ANSI: 2
\[ 3130.947482\] sd 206:0:0:0: \[sda\] 976773168 512-byte logical blocks: (500 GB/465 GiB)
\[ 3130.948602\] sd 206:0:0:0: Attached scsi generic sg0 type 0
\[ 3130.950308\] sd 206:0:0:0: \[sda\] Write Protect is off
\[ 3130.950387\] sd 206:0:0:0: \[sda\] Mode Sense: 38 00 00 00
\[ 3130.953130\] sd 206:0:0:0: \[sda\] No Caching mode page found
\[ 3130.953203\] sd 206:0:0:0: \[sda\] Assuming drive cache: write through
\[ 3130.961231\] sd 206:0:0:0: \[sda\] No Caching mode page found
\[ 3130.961312\] sd 206:0:0:0: \[sda\] Assuming drive cache: write through
\[ 3131.096185\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3131.381492\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3131.676711\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3131.971902\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3132.267086\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3132.562270\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3132.712025\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3132.712106\] sd 206:0:0:0: \[sda\]  
\[ 3132.712140\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3132.712178\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3132.712205\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3132.712305\] end\_request: I/O error, dev sda, sector 0
\[ 3132.712345\] Buffer I/O error on device sda, logical block 0
\[ 3132.847682\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3133.142899\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3133.438095\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3133.733289\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3134.028505\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3134.323707\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3134.473244\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3134.473324\] sd 206:0:0:0: \[sda\]  
\[ 3134.473357\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3134.473396\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3134.473422\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3134.473518\] end\_request: I/O error, dev sda, sector 0
\[ 3134.473558\] Buffer I/O error on device sda, logical block 0
\[ 3134.609000\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3134.904220\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3135.199424\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3135.494638\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3135.789882\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3136.085081\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3136.234861\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3136.234942\] sd 206:0:0:0: \[sda\]  
\[ 3136.234974\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3136.235014\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3136.235040\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3136.235136\] end\_request: I/O error, dev sda, sector 0
\[ 3136.235177\] Buffer I/O error on device sda, logical block 0
\[ 3136.235299\]  sda: unable to read partition table
\[ 3136.244113\] sd 206:0:0:0: \[sda\] No Caching mode page found
\[ 3136.244198\] sd 206:0:0:0: \[sda\] Assuming drive cache: write through
\[ 3136.244248\] sd 206:0:0:0: \[sda\] Attached SCSI disk
\[ 3136.429360\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3136.724578\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3137.019861\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3137.315036\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3137.610218\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3137.905427\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3138.055309\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3138.055385\] sd 206:0:0:0: \[sda\]  
\[ 3138.055422\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3138.055459\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3138.055485\] Read(10): 28 00 00 00 00 00 00 00 f0 00
\[ 3138.055583\] end\_request: I/O error, dev sda, sector 0
\[ 3138.055622\] Buffer I/O error on device sda, logical block 0
\[ 3138.055684\] Buffer I/O error on device sda, logical block 1
\[ 3138.055720\] Buffer I/O error on device sda, logical block 2
\[ 3138.055755\] Buffer I/O error on device sda, logical block 3
\[ 3138.055790\] Buffer I/O error on device sda, logical block 4
\[ 3138.055824\] Buffer I/O error on device sda, logical block 5
\[ 3138.055858\] Buffer I/O error on device sda, logical block 6
\[ 3138.180976\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3138.466284\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3138.751642\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3139.037079\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3139.332211\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3139.627405\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3139.777006\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3139.777088\] sd 206:0:0:0: \[sda\]  
\[ 3139.777119\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3139.777162\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3139.777190\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3139.777288\] end\_request: I/O error, dev sda, sector 0
\[ 3139.777323\] quiet\_error: 23 callbacks suppressed
\[ 3139.777358\] Buffer I/O error on device sda, logical block 0
\[ 3139.962008\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3140.257168\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3140.552444\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3140.847589\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3141.142778\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3141.437970\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3141.587839\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3141.587922\] sd 206:0:0:0: \[sda\]  
\[ 3141.587956\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3141.587993\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3141.588021\] Read(10): 28 00 00 00 00 00 00 00 f0 00
\[ 3141.588121\] end\_request: I/O error, dev sda, sector 0
\[ 3141.588162\] Buffer I/O error on device sda, logical block 0
\[ 3141.588228\] Buffer I/O error on device sda, logical block 1
\[ 3141.588265\] Buffer I/O error on device sda, logical block 2
\[ 3141.588300\] Buffer I/O error on device sda, logical block 3
\[ 3141.588335\] Buffer I/O error on device sda, logical block 4
\[ 3141.588369\] Buffer I/O error on device sda, logical block 5
\[ 3141.588405\] Buffer I/O error on device sda, logical block 6
\[ 3141.588441\] Buffer I/O error on device sda, logical block 7
\[ 3141.588477\] Buffer I/O error on device sda, logical block 8
\[ 3141.723340\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3142.008700\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3142.294008\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3142.579457\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3142.874631\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3143.169809\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3143.319518\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3143.319599\] sd 206:0:0:0: \[sda\]  
\[ 3143.319633\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3143.319672\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3143.319700\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3143.319798\] end\_request: I/O error, dev sda, sector 0
\[ 3143.484670\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3143.799687\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3144.094726\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3144.389973\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3144.685229\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3144.980369\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3145.129772\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3145.129809\] sd 206:0:0:0: \[sda\]  
\[ 3145.129823\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3145.129840\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3145.129853\] Read(10): 28 00 00 00 00 00 00 00 f0 00
\[ 3145.129896\] end\_request: I/O error, dev sda, sector 0
\[ 3145.255897\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3145.541259\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3145.826603\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3146.112009\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3146.407167\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3146.702336\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3146.852225\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3146.852306\] sd 206:0:0:0: \[sda\]  
\[ 3146.852338\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3146.852380\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3146.852407\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3146.852503\] end\_request: I/O error, dev sda, sector 0
\[ 3146.852538\] quiet\_error: 52 callbacks suppressed
\[ 3146.852573\] Buffer I/O error on device sda, logical block 0
\[ 3147.046747\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3147.341944\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3147.637250\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3147.932432\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3148.227603\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3148.522749\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3148.672173\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3148.672213\] sd 206:0:0:0: \[sda\]  
\[ 3148.672227\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3148.672243\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3148.672255\] Read(10): 28 00 00 00 00 00 00 00 f0 00
\[ 3148.672300\] end\_request: I/O error, dev sda, sector 0
\[ 3148.672319\] Buffer I/O error on device sda, logical block 0
\[ 3148.672350\] Buffer I/O error on device sda, logical block 1
\[ 3148.672366\] Buffer I/O error on device sda, logical block 2
\[ 3148.672381\] Buffer I/O error on device sda, logical block 3
\[ 3148.672396\] Buffer I/O error on device sda, logical block 4
\[ 3148.672411\] Buffer I/O error on device sda, logical block 5
\[ 3148.672426\] Buffer I/O error on device sda, logical block 6
\[ 3148.672440\] Buffer I/O error on device sda, logical block 7
\[ 3148.672455\] Buffer I/O error on device sda, logical block 8
\[ 3148.798335\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3149.093531\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3149.388697\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3149.683817\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3149.979098\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3150.274320\] usb 1-1: reset high-speed USB device number 84 using ehci-platform
\[ 3150.423545\] sd 206:0:0:0: \[sda\] Unhandled error code
\[ 3150.423576\] sd 206:0:0:0: \[sda\]  
\[ 3150.423586\] Result: hostbyte=DID\_ERROR driverbyte=DRIVER\_OK
\[ 3150.423597\] sd 206:0:0:0: \[sda\] CDB: 
\[ 3150.423607\] Read(10): 28 00 00 00 00 00 00 00 08 00
\[ 3150.423636\] end\_request: I/O error, dev sda, sector 0

Je vois l'appareil à /dev/block/sda mais je n'ai aucune idée pour le monter manuellement. Je m'attendais à ce que /dev/block/sda1 y /dev/block/sda2 .

Comment puis-je gérer ces partitions ?

0voto

duckbrain Points 171

Je n'arrive pas à résoudre le problème initial. Je viens de fusionner toutes les données dans une seule partition. Je ne sais pas pourquoi le système ne peut pas monter le disque avec deux partitions.

androidalle.com

AndroidAlle est une communauté de androiders où vous pouvez résoudre vos problèmes et vos doutes. Vous pouvez consulter les questions des autres sysadmins, poser vos propres questions ou résoudre celles des autres.

Powered by:

X