J'essaye d'installer Lineage OS sur mes Samsung Galaxy S4 et S5, en suivant les instructions sur https://wiki.lineageos.org/devices/jfltexx/install
J'ai déjà installé avec succès Lineage sur un S4, en utilisant ces instructions, donc je ne comprends pas ce qui se passe.
Les S4 et S5 présentent le même problème.
Je suis bloqué à un stade très précoce (étape 4) : Au lieu de 'Remplacer le pilote', j'ai l'intitulé 'Réinstaller le pilote' sur le bouton (Zadig v2.0.0.147). J'imagine que c'est parce que je l'ai déjà fait auparavant et que c'est le même pilote qui est utilisé (également pour le S5 ???). Donc peut-être que c'est bon.
Dans les instructions, il n'est pas question de changer le pilote cible et je peux installer tous les pilotes avec succès. Cependant, aucune des options ne fonctionne lorsqu'on passe à l'étape suivante, à savoir l'exécution de heimdall print-pit
Voici le résultat pour chaque conducteur :
WinUSB v6.1.7600.16385
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
libusbx: error [windows_transfer_callback] detected I/O error 87: [87] The param
eter is incorrect.
ERROR: Failed to send data: "ODIN"
Releasing device interface...libusb0 (v1.2.5.0)
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -1
WARNING: Control transfer #2 failed. Result: -1
WARNING: Control transfer #3 failed. Result: -1
WARNING: Control transfer #4 failed. Result: -1
WARNING: Control transfer #5 failed. Result: -1
WARNING: Control transfer #6 failed. Result: -1
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send end session packet!
Releasing device interface...libusbK v3.0.4.0
Initialising connection...
Detecting device...
Manufacturer: "Sasmsung"
Product: "MSM8960"
length: 18
device class: 2
S/N: 0
VID:PID: 04E8:685D
bcdDevice: 0100
iMan:iProd:iSer: 1:2:0
nb confs: 1
interface[0].altsetting[0]: num endpoints = 1
Class.SubClass.Protocol: 02.02.01
endpoint[0].address: 82
max packet size: 0010
polling interval: 09
interface[1].altsetting[0]: num endpoints = 2
Class.SubClass.Protocol: 0A.00.00
endpoint[0].address: 81
max packet size: 0200
polling interval: 00
endpoint[1].address: 01
max packet size: 0200
polling interval: 00
Claiming interface...
Setting up interface...
Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet. Retrying...
ERROR: libusb error -7 whilst sending packet.
ERROR: Failed to send end session packet!
Releasing device interface...J'ai essayé sur une autre machine Windows et j'ai eu le même problème. Donc, entre deux ordinateurs et deux téléphones, je suis toujours coincé au même endroit. Il ne reste donc plus que la Racine du problème pour s'asseoir entre le dossier de la chaise et le clavier - qu'est-ce que je fais de travers ?
Des recherches plus poussées suggèrent des problèmes de pilotes USB, mais cela nous ramène à Zadig/heimdall, n'est-ce pas ?
